Skip to content
No Deposit Bonuses

Deep groove ball bearings. single row without filling slot

deep groove ball bearings. single row without filling slot

Home Products Single row deep groove ball bearings. The single row deep groove ball bearings have relatively deep raceways on both rings without a filling slot and they are non-separable. By optimum size of balls and by their conformity to the raceways high load ratings are achieved. They can carry axial and radial loads in both directions and are suitable even for high rotation speeds. These bearings are manufactured in a broad selection of types and are the most common rolling bearing type. Main dimensions of single row deep groove ball bearings specified in the dimension tables are in accordance with the international standards ISO Snap ring bearimgs. dimensions comply with the international standards ISO deep groove ball bearings. single row without filling slot

When shielded bearings must operate under certain extreme conditions, such as very high speeds or high temperatures, grease may sigle at the inner ring. For bearing arrangements where this would be detrimental, special design steps must be undertaken. For additional information, contact the SKF application engineering service.

deep groove ball bearings. single row without filling slot

SKF bearings shielded on both sides are lubricated for the life of the bearing and should not be washed or relubricated. They are filled with the appropriate amount of a high-quality grease under clean conditions.

Ball bearing Radial deep groove Single row, without filling slot Deep groove ball bearings are particularly versatile. They are suitable for high and very high speeds, accommodate radial and axial loads in both directions and require little maintenance. Depending on the main application for which they are used, deep groove ball bearings with filling slots have a cage or no cage. The smaller sizes, which are mainly used for automotive gearboxes and are identified by a standard designation, incorporate a cage. The standard assortment of these bearings comprises: Basic design open bearingsPhone: () SKF single row deep groove ball bearings with filling slots. Nodes supplies the single row deep groove ball bearings with filling slots shielded on one or both sides. Details regarding the suitability of shields under various operating conditions are listed in table below.

The bearings are considered virtually maintenance-free. If they are to be hot mounted, an induction heater should be used.

ZVL SLOVAKIA a.s. | Single row deep groove ball bearings

Shields SKF bearings with shields are primarily intended for applications where the inner ring grroove. Shields are fitted in the outer ring and do not make contact with the inner ring, but form a narrow gap with it.


Shields are made of sheet steel. SKF single row deep groove ball bearings with filling slots have a filling slot in both the inner and outer rings to accommodate more balls than standard deep groove ball bearings.

Ball bearing Radial deep groove Single row, without filling slot SKF - RUBIX Iceland

fipling Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots, but their axial load carrying capacity is limited. They are also unable to operate at the same high speeds as bearings without filling slots.

SKF deep groove ball bearings with filling slots are available open or with shields. They are also available with or without a snap ring groove.

SKF single row deep groove ball bearings with filling slots. Nodes supplies the single row deep groove ball bearings with filling slots shielded on one or both sides. Details regarding the suitability of shields under various operating conditions are listed in table below. Maximum Type Ball Bearings contain a larger number of balls than normal deep groove ball bearings because of filling slots in the inner and outer rings. Because of their filling slots, they are not suitable for applications with high axial loads. BL2 and BL3 types of bearings have boundary dimensions equal to those of single-row deep groove. Ball bearing Radial deep groove Single row, without filling slot Deep groove ball bearings are particularly versatile. They are suitable for high and very high speeds, accommodate radial and axial loads in both directions and require little maintenance.

SKF open bearings that are also available with shields, may have recesses in the outer ring. SKF single row deep groove ball bearings with filling slots are fitted with a riveted, ball centred stamped steel cage no designation suffix. Toggle navigation.